It's official! Spring has arrived -- at least on the calendar. We've even heard a few lawn mowers in the neighborhood in the last week or so -- hoping to see a few more sprigs of green and color in a few more days
I've wanted to do a hanging mason jar project for a long time... but just didn't get the right vibes until the tulips came to mind. So let's get started.
You'll need:
cream colored brushed flannel (2 fat quarters or a 1/4 yard)
Tulip fabric dyes (green, orange, yellor)
tea (berry and black)
sewing machine
fiber fill
bamboo skewers
hot glue
wire cutters
board
screw
mason jar/with lid
twine
mica powder (Mixed Media Supplies)
filler (optional)
scissors
pattern (I drew my own)
gloves
Plan on working on this project for a couple of days.... First steps for me were
1) draw my patterns. Be sure to allow a 1/4" seam for the flowers.
2) I chose to make 3 different colored flowers... 3 in each color. Cut three pieces of fabric large enough to cut 6 flowers from. Remember you'll also need a piece for the leaves.
3) Mix the dyes as directed by the manufacturer. I poured about an inch of mixed dye into a pint sized mason jar and placed the fabric - one for yellow and one for orange. In a third mason jar, steep a couple of bags of the berry tea. Add the fabric. In a 4th jar, add some green dye and place the fabric you've set aside for the leaves in that jar. Let the fabric soak for about 30 minutes. Using gloves, lightly wring the fabric. I did not rinse the extra dye out of the fabric before air drying. After the fabric has dried, heat set using an iron. Use a towel to absorb any additional ink that may be released with the iron. Begin with the lightest color first, then gradually work to the darker colors. Set aside. But you're not ready to cut yet. You can return the leftover dye to their storage containers to use at a later date. Clean the jars.
4) Steep 2 large bags of black tea. Divide between the 4 jars and place a piece of fabric in each of the jars. Allow to soak for about 20 minutes or until the fabric is sufficiently grunged. Again, using gloves, wring the fabric. Let dry. Heat set the fabric again as described previously.
5) Trace the patterns on the fabric and cut. You'll need two cuts for each flower and one cut for each leaf - I forgot to take a picture of the leaves. OOPS!
6) Stitch each flower, wrong sides together using a 1/4" seam allowance, leaving about 3/4 " area unstitched to allow for turning. Clip curves and corners and turn. Set aside.
7) Lightly stuff each flower with some fiberfill.
8) If desired, "paint" the skewers green.
9) Using the glue gun, apply a small bit to the base of the flower and attach to the skewer. Repeat until all the flowers are attached. Spritz each flower with a bit of Mixed Media Supplies mica powder mixed with water and let dry.
10) Trim skewers if needed. Glue a leaf to the skewer and repeat until all the flowers have been completed.
11) With the crop-o-dile, punch a hole on the ring on either side. Thread some twine through the holes and tie off leaving enough to hang the mason jar from the hook in the board.
12) Arrange the flowers in the jar as desired. Add filler if desired. Spritz with a little more mica powder dissolved in water. And you're done!
There's a little bit of shimmer on the flowers and leaves, but it's hard to catch.
I added a string of fairy lights to my bottle before adding the flowers. They're easy to turn on and off and sure add a touch of whimsy to this prim bouquet.
Hope you have some creative time scheduled soon! Thanks for stopping by!
Comments