Izbzee

Tag 5 - The Sweetheart Tree

Not sure if the title of this tag brings the song to mind or not, but when I thought about making this, it came to mind and of course, that means we need a sound module and the song to play too!  



This tag is oversized.. it's just over 5 inches tall.  The tag shape is the result of some added elements found in the SCAL library and combining those shapes to make the top of the tag.  The tree is in the library as are the hearts.  I cut all of the elements from white paper and added color using alcohol markers.  Complete the tag front and set aside.  

I altered the sound module slightly to fit into the interior of the base tag.  The sound module also has an extended pull tab that was glued to the one that comes with the module for a little more stability. 

Record the module BEFORE securing to the base tag following the manufacturer's directions found here.   Add three layers of foam tape around the perimeter of the tag as the sound module has some height and you need to accommodate for that.  

 

  Thanks for stopping by this week.  Hoping your weekend has some crafting time built in.  Enjoy!  

12 Tags of Christmas - Tag 10

Hard to believe that we're coming to the close of this year's tags.  I know mine have lacked a bit this year... but I'm blaming it on lack of energy and surgery!  

At any rate, here's tag 10 -- a 2 layer pine cone.  Both layers were cut in the lighter paper.  Using Timber Brown Staz-On ink pad, I swiped the top layer with the ink.  Adhered the 2 layers together and topped with a bit of mica dusted on it. 

2021 Christmas Tags - tags 4

 

Penguin Fun.... distress ink background in Galaxy colors.  A spritz of mica for a little sparkle. The penguin is a find from Creative Fabrica.  Reduced to about 2 inches high to fit on this mini tag.  Inset shadow on both base pieces set to a stitch line.  All pieces cut using SCAL 5 Pro and the Skycut.  

2021 Halloween tags

Just a quick note for early this week....  

Today was supposed to be a busy day of paper piecing... didn't quite happen as planned due to the change of weather and a whopper of a migraine!  However, the day wasn't a total loss.  I did get a dozen of these tags done and they'll be perfect for the bags of treats we plan on sharing with the grands for Halloween.  

 

The papers are from Creative Fabrica as is the font.  Shapes are from the SCAL5 Library with the exception of the scalloped circle. That is a Penny Duncan file.  The wave piece was created in SCAL5 using the wave command.  The skycut machine made quick work of all the cuts and the "Trick or Treat" Print 2 Cut was spot on again.  Once all assembled, a quick spritz or two of mica spray added just a quick touch of iridescence to each of the tags. 

Hoping your Halloween crafting is coming along and if you've already moved on to one of the next holidays, keep on crafting!  Enjoy your time and nurture your creative soul!  



                                                                                                                                                                                                                                              

 

Stencils and Clay

Take a peek at this new share on The Artistry!  Perfect for some Spring or Summer decor.  Lightweight stenciled clay ornaments using doodles and mandalas as stencils...  


And while you're visiting be sure to check out the promos now going on!  (shameless plug for @CreativeFabrica.com and affiliate link.)  All promotional pricing on the site is good through April 6!  Don't miss out on some fabulous deals.    

2020 - 12 Tags of Christmas Tag 10

Pinterest inspired this tag -- I liked the lines and I'm glad that the eCal software provides the tools to make it happen.  Basic tag shape from the library, sized as needed.  Make a second copy and using the knife, cut the second one on an angle.  Add a line and use the wave tool and close the bottom half of the tag.  I added a line of small circles  -- I decided that the Let it Snow would be a simple print 2 cut  and I used heart 2 from the basic shapes library for the heart.  

The snowman is colored using Ohuhu markers, a sargent metallic pen and a bit of silver mica was brushed across a few places.  He is popped up on some dimensional foam.   I added some dimensional glaze to the front, let dry and then secure in place on the front of the tag using some dimensional tape..  The back of the tag is embossed with the Swiss Dots folder.  

Thanks for stopping by.  Have a great week!  

a little mixed media

Playing with a little mixed media in this card... loving the gelli print background, stamping, edge die, clay (Sculpey) and mica (Mixed Media Supplies) for this dimensional card front.    

• 
• 
• 

The print background paper is a copy of an original gelli print with a stamped image (retired SU).  Scanning the prints has really been a blessing.  It's fun to be able to incorporate the digital image in lots of projects.

The heart is crafted from black sculpey clay heart with a leaf imprint.  The mica was transferred directly to the heart using the leaf.  Baked and sealed with clear sealer from Sculpey.  This heart is one of several I made a while back and didn't give away - but wasn't quite sure how to incorporate into a project.  Thankfully, it's found a home and it's perfect for this card which was sent to someone needing a little cheer last month.  

It was also quite nice to have a stash in place and not have to worry about placing an order and waiting for items to come through the mail or delivery services.  Dear hubby was pleased as well to know that there were a few cards he needed in the stash too.  

As you've probably noticed, crafting has been a little sparse the last few months. The mojo has been elusive and time as well.  Hoping with summer approaching I'll be able to get back into my weekly routine of crafting and creating on Wednesdays again with fabric, fiber and paper... and maybe even begin some additional digital stuff as well.  Fingers crossed that things will come together as planned and sharing some of these ideas soon.  

Hoping you'll find or make some time available to nurture your creative spirit this coming week or during the month if this week has already been filled to capacity....  Be safe, stay well and remember: 

 

 

2019 12 Tags of Christmas Tag 4

More foil quill fun!  The star is wood laser cut from FSJ... I've had a couple of packages of these in my stash for a couple of years.  Glad to be able to use them.  Added a touch of pearl mica from Mixed Media Supplies to the colored cardstock and to the star.  A tiny bit of white gel pen here and there...and a few hand drawn stars.  Using a script font of your choice set the lettering to pen/draw, fill, add the shadow, remove the stroke and foil*. Do not remove the mat from the machine.  Cut the blackout shadow. 

*Foil Quill fill was done using the Line Fill command in the Effects drop down of eCal3;  Settings were:  line space .100; crosshatch 45 and angle 90. Adjust as needed after previewing the fill.  Fine tip (pink tool) and D adapter for the eclips. 

2018 - going, going, gone

2018 has been a full year.  Lots of good things have happened overall and even the not to great stuff wasn't all that bad when you think about it.

I've really enjoyed my creative time so much more this year.  A few artsy and fun classes from penwork to gelli plate/art and general play with paper, clay and fabric.  Grateful for it all. 

I've decided that for me, it would be fun to recap the year with a few pictures of some of my favorite projects....  you can check the archives by the year and month for the whole year's worth of fun.   

January the Valentine Ornament box.  File from Lori Whitlock - Halloween house adapted for the holiday. 

February a little clay play.  Love using Sculpey, stamps, mica and more.  This was among my favorites for some mixed media play and design team work for Mixed Media Supplies. 

March Lots of pastel colors and a touch of non-caloric chocolate for this fun dimensional card from Simply Crafty SVGs  was a favorite for the month. 

April  A sweet shadowbox card using G45's Secret Garden.  File from SVGCuts.com

May  ATC sized gelli prints -- and digital stamps.  So much play fun! 

June  quick and easy card using a digital stamp from RGStudio360. 

July -  July porch decor using a recycled shelving side panel...

August - we got an early start with October crafting with this paper quilt. So much fun kicking up a few heels! 

September  The Geodesic Pumpkin from SVGCuts was a perfect addition to the mantel for September and October! 

October  brought more than a change in the weather.... it's also anniversary time for our youngest son. We went a little overboard on this year's card, but it was so worth it! 

 

November I couldn't pick just one project for this month, so I'm sharing two!  The first was a fun 12 Tags of Christmas challenge.  All of the details for this one including a video can be found here. 

Dreaming Tree also put out a bevy of great files to work with in 2018... among my favorites was this cutie! 

December   Our Gnomie tree - I love my laser etcher and I've loving having found a new way to showcase some digital artwork using wood pieces from my stash!  

I hope you've enjoyed this review of my year. Crafting is my respite -- my discovery for the year.  I've loved taking the online classes and exploring more ways to develop my talents and play.  I'm grateful to my family for their generosity in time, space and respite. 

We look forward to a fabulous 2019 -- carving in creative time each week. Hoping you're doing the same! 
My word for 2019 - Inspire

Ornament card

I saw this idea on a Gelli Art video shared recently on their blog.  I just had to make a few.  I love gelli printing and figured it was worth the price to get a couple of small circle plates -- LOVE THEM and it was good retail therapy to boot!  LOL

 

 

You'll need:
Paint (colors of your choice)
brayer
stencils and other texture supplies
Gelli plate (circle, small)
Oatmeal/kraft color cardstock - FSJ
twine, ribbon
adhesive (Lineco)
white cardstock
Silver Sharpie
Mixed Media Supplies mica

eclips2
eCal3
printer/scanner (optional)

Create your prints using the gelli plate and paints.  Set aside to dry.  You can print directly onto your card front as shown in the video or stamp several onto a sheet and scan and then trace in eCal to cut. 

Create the ornament top using the basic shapes library and cut on white cardstock.  Color with the silver Sharpie.  My marker wasn't as juicy as a new one, and I was able to get the ridge lines with ease.  😊

If you printed directly to your card front, glue on the ornament top and add the twine or ribbon to finish off.  I used a stamp on the inside, but you could certainly print before you add your gelli print to the front of the stock. 

Because I desired some cleaner edges on most of my prints (I got a little heavy handed with the paint on a few of the prints), I cut my prints and glued to the front of the cardstock bases.  I added some mica to all the fronts for a little more bling even though it doesn't show up well in this image. 

Thanks for stopping by as we close out 2018.  I'm looking forward to more creative time in 2019!  #eclipsecalmaker