Izbzee

Oh Hoppy Day!

I've been wanting to make these for a very long time -- and even bought the Fall Pumpkin Blocks from MyScrapChick last Fall when it came out. I LOVE that the files go together as a dimensional project so easily!  Let's get started.

You'll need:
12 x 12 white cardstock (Fun Stampers Journey)
Fall Pumpkin Blocks (MyScrapChick)
Butterfly and flowers (unknown source)
Heart (eShape store)
Sizzix eclips and eCal software
eBrush
Tombow Markers
Scor-tape
Wood Grain embossing folder
Cut-n-Boss
Twine
Glue Dots
mini brads
Canvas
Scissors
Mod Podge

Open the cutting files for the blocks.  I chose to use all four blocks.  Cut at the import size for the Fall Blocks and resize the flowers and butterflies as desired.  The wings on the butterflies are pretty fragile so be very careful when you take them off the mat.  Cut 2 of each front.  One of each of the front cuts will be embossed.

Using the Wood grain folder and the cut-n-boss, emboss a front for each of the blocks. 

Since all my paper started out as white, now's the time to add some color!  Using the eBrush, TB marker adapter and Tombow markers, color as desired.  I used a light gray for the embossed block fronts to add a little more texture.  It doesn't show well in the photos, but it is there.  Using shades of yellow and orange and dark gray, color the flowers and butterflies.  With a pink marker, color the hearts. 

Using your favorite curling tool,  shape the flower petals and cup slightly.  Use a brad to secure layers.  I colored a small center and placed that onto the brad for a couple of flower centers.  Glue the butterfly top to the bottom cut of the butterfly.  Shape for a little more dimension.  I added a little bit of sparkle to the edges using the clear sparkle pen from Crafters Companion. 


Cut the canvas into a bunny ear shape as shown in the photo below.  Protect the surface of your table with some wax paper and brush the canvas with some ModPodge to stiffen.  Let dry overnight. 



But the blocks together.  Use the un-embossed front.  Use some scraps of paper and glue to the inside top flap for a little more bulk to support the ears.  Cut a slit or punch a hole in the flap.  Apply the embossed front to the block.  Add some whiskers using some twine.  With some pop up dots, add the heart cut.  Fold the canvas "ears" in half and secure in the flap. 

Depending on the weight of your cardstock, you may need to add a little weight to the base.  I used about 1/3 cup of rice* in a small plastic bag .  Secure the top flap in place with scor-tape.  

TIP:  If you wanted to use these as gift bags, you certainly could.  Just use removable glue dots on the top or bottom flap for ease in opening. 

Secure your embellishments using glue, pop-dots and/or glue dots as desired and display!

Enjoy some time in your happy place this week!  Hoping to see you again next week! 

Related articles

Kick up your heels and do a little crafting

Sunny Sunflowers

Birthday with Bic Mark-Its!

Reclaimed table

We found this at a local thrift shops for just a few bucks.  It was definitely in need of some love, don't you think?

With some TLC, it now looks like this!

 

The hardest part was deciding what the finished top should look like.  I decided to put a doily on top.  The file is from SVGCuts and I cut it with my eclips2 using the vinyl settings. 

I wanted all the details to really pop, so I painted the top with black flat paint I had on hand with 2 coats after sanding and removing any the dust.  I let it dry overnight.  I applied the stencil to the table top, making sure that the rest of the table was not exposed to any stray spray from the eBrush and siphon adapter. 

I chose an opaque white paint from Createx. 

The coverage was awesome as you can see! 

I loved that the paint didn't drip and the mist provided nearly full coverage on the first layer.  The eBrush made this such an easy project!!!!
Once the paint was really dry (a couple of hours later), I removed the stencil/mask from the table top.  It was so much fun watching the pattern reveal as the vinyl was removed.  (Mom was totally surprised and in awe at the precise image -- she has Alzheimer's and these kind of things make her very happy). 

I applied 3 coats of a Mod Podge matte finish. Voilá! 

 

Loving this and I think I may head back down to the thrift store and look for a couple of other small tables.  They would be perfect to use downstairs! 

Thanks for dropping by... hope you'll take a peek through the archives for more eBrush projects!

 

Take a note

It's been so fun using SaborPapel this month.  The Amor Collection was my choice for this project.

For each, you'll need:
4" square coaster (pkg of 6 coasters from $ store)
cardstock (2 complimentary colors, white)
Amour collection -- try to choose just one design! 
die cuts from Ole collection
adhesive (double sided tape)
pop-up dots
Xyron permanent adhesive
sentiment stamp
ink pad
corner rounder punch
Clips
eBrush and marker adapter
Markers (Sharpies)
Stencil (retired - but there lots of stencils to choose from)

For each note pad, cut 4" square from your Amour cardstock.  (a 12 x 12 sheet will make 9 squares).  Round each corner of the square with the corner rounder. 



Run the cardstock piece through the Xyron. 

Apply to the coaster and if desired seal with a waterproof sealer. 

Set the coasters aside and get your eBrush and markers.  Cut the colored cardstock in the following dimensions:  White: 2 1/2" square; Middle square is 2 3/4" square; the bottom layer is 3" square. 

I colored the middle layer -- using the eBrush and a stencil. 

Stack the layers, add the sentiment and using the pop dots add a cut from the embellishment package

Those black clips aren't so pretty -- so to dress them up a bit, cut a few strips of scrap paper.  Run through the Xyron and apply to the clips.  You can add a little more bling with some embellishments or a glitter pen.

Place the note pad on the coaster, add your "card" and add the clip.  These make fun, easy and inexpensive gifts!  

Thanks for dropping by!  Hoping your creative time is nourishing!  Stay tuned, there's more eBrush fun coming through the summer! 

A little more like home.....

I really tried to finish this project in January, but just couldn't get it to come together...  but today, despite the migraine and nasty cold, I decided to try to finish it and get it out on the porch.

The burlap canvas was a 2-fer at HL I picked up before the move.  The "H" was cut by K's hubby and I'm really liking it with no serifs.

I used some Deco Art goodies and a stencil (my design) and started the mixed media journey.  What you can't see is the "mess" I created on the wooden letter; but the leftover texture looks cool under that black paint. The H is screwed to the bar on the back of the canvas... makes it easy to center. 

Deco Art's metallic glaze is the highlight color and is so easy to use.  It's on the canvas and on the tag.  I even rubbed a bit on the sage colored ribbon to pull the colors together a little more.  The wooden tag and metal heart clip and the word LUCKY from a TC die finish it off for the month of March. 

The front door needed something too.  A little color on the black door -- this silk coleus fit nicely in the metallic welcome basket.  I love how versatile this half basket shape is. Flowers, greenery, berries and more all year long!  Maybe it will take on a new color later this year. 

Mini Album Altered Tin

Latina Crafter is our sponsor for this month again!  I've really enjoyed using their products --

Well, it's been a couple of weeks since I shared this mini tag album with you -- and promised to share the storage container.  And here it is featuring a Latina Crafter stencil, the eBrush with the siphon adapter AND the Cut-n-Boss!


My paper started out as plain light gray.  I used the Cut-n-Boss and the Twill Herringbone embossing folder using the following sandwich from the bottom up, D, A, Embossing folder, A.

After the paper was embossed I got the eBrush out with the siphon adapter and a bottle of ink adding some ink to the well attachment.  Spray the whole page and let dry (It doesn't take long at all).  Rinse the well out and add a bit of water.  Now spray the water - the splotchier the better.  Let dry.




When the paper is dry, turn it wrong side up and trace the top and bottom of your tin.  Mark each. Cut and trim if needed.   Trace again and this time, cut just inside the traced line for the inside top and bottom of the tin.  Measure the width of the top and bottom sides.  (I used one full sheet 8.5 x 11 to cover the tin.  I had a second sheet as back-up if needed.)  Repeat again for the inside if you wish.  Decorate your top as desired.  I chose to use a stencil from Latina Crafter (Cumpleanos) to add a little interest.  The lettering is from a PC lettering set and the heart is an old punch from my stash (so old, the maker's identity has worn off). 

Using Modge Podge adhere the pieces.  Let dry.  Tip:  Apply the inside pieces first.  Be sure to trim around the hinges and allow to dry thoroughly BEFORE applying a top coat to the paper both inside and out. 

What project is next up in your craft room using Latina Crafter and CraftwellUSA?  I hope it's something fun and summery.... Make a memory in your crafting space this week!

Thanks for dropping by! 

Related articles

Tag Album with Latina Crafter

Kick up your heels and do a little crafting

Cloudy with a chance of Sunshine

Sunshine & Flowers

Tag Album with Latina Crafter

Our sponsor this month is the incredible Latina Crafter!  I have really enjoyed working with their products!  

This mini tag album was fun to create using the Puntos and Cumpleanos stencils from Latina Crafter! 

You'll need:

Wooden Tags (1 1/2" x 3 1/4) from
Latina Crafter Stencils
Latina Crafter Wood Veneers, Feliz Cumpleanos
Craftwell eBrush, AD Adapter (with foam cushion hack)
Craftwell Siphon adapter, siphon cup
Classic Markers (Stampin' Up!)
Ink refills in coordinating colors
Acrylic craft paint
Modge Podge
Scotch Quick Dry Glue
Electronic Die Cutting Machine (Sizzix eclips2, eCal2)
Craftwell Cut-n-Boss and plates
TC Pocket Dies (Lucky Tag)
Cardstock (white or light gray)
Ribbon or twine
Foam brush (for paint and Modge Podge Application0
embossing folder*

*Optional

Tag 1:  Paint all the tags white.  I only did one side and covered the back side with some stenciled and eBrushed paper

Using the eBrush with the markers, create an ombre effect using 3 markers as desired and the Puntos stencil. 

Lightly edge the tag with gray or brown marker

Cut the SO using your die cutting machine.  You can ungroup the 'O' and remove the inner circle and replace it with a heart.

Weld the S and the O so they cut as one unit.

Change to the siphon adapter, with a small amount of ink, spray the die cut.  set aside to dry.  

Apply a light coat of modge podge to the tag.  Lay the SO on the tag as desired and set aside to dry. 

You can apply another light coat of Modge Podge when the first has dried. 

If you apply something to the back of the tag, seal it with Modge Podge as well.

 

Tag 2:    Cut the Lucky tag using the Cut-n-Boss using the sandwich as described below:

Stencil the Lucky Tag with the Banner stencil from the Feliz Cumpleanos set.  Use the eBrush with the AD Marker adapter and the SU markers. 

If desired for a little more texture and interest, emboss the are above the lettering with an embossing folder of your choice using the Cut-n-Boss with the following sandwich:
Add a strip of contrasting color to the back of the Lucky Tag for a little more interest. 

With the ebrush and a gray marker, add some gray along the edge of the tag. 

Apply a light coat of Modge Podge to the wooden tag and place the Lucky Tag centered on the tag.  Let dry.  Apply a "dusting" of gray along the edge of the tag.  Apply a second coat of Modge Podge to seal the tag. 

Finish the back of the tag as desired.

 

 

Tag 3:  Using the eBrush and marker and the Balloon Stencil from the Feliz Cumpleanos, add some color to the tag.

Cut a 2 using your die cutting machine, color using the siphon adapter. 

Edge the tag with a light 'brushing" of gray along the edges.  I also spattered some gray on the tag.

Apply a light coat of Modge Podge and add the 2 while the coat is still wet.  Let dry. 

Use some scotch quick dry glue to add the banner veneer cut.  When that has dried, brush on a second coat of Modge Podge.  Let dry.

Finish back of tag as desired.

 

 

 

 

 

 

Tag 4: Cut a paper tag using the electronic cutting machine -- I chose the word celebrate for my tag.  

eBrush the Hat Stencil onto the tag using a marker.  Add a bit more color using another marker.  Allow the marker to splatter here and there. 

Add some gray to the edge of the wooden tag.  Add a light coat of Modge Podge, while it's still wet, center the paper tag and let dry.

Add highlights if desired and a second coat of Modge Podge. 

Finish the back and seal with Modge Podge and set aside with the rest of the tags. 

 

 

 

 

 

 

 

Tag 5:  Ebrush and stencil using the Puntos Stencil again. 

Add some gray to the edges. 

Choose a photo as a focal point and trim to size as needed. 

Use that Modge Podge again to seal the wood and as "glue" for the photo to the tag. 

 

When that has dried, add a few dabs of glue to the back of the Veneer hat.  You can apply a second coat of Modge Podge if you'd like. 

 

Finish the back as desired and be sure to sign your project.

 

 

 

 

 

 

My husband is celebrating a milestone birthday this year, so I'm planning some extra goodies for him.  He usually doesn't read my blog, so I hope he won't take a huge interest until AFTER his birthday!  LOL

By the way, every tag album needs a container.... stay tuned that's up next!

Thanks for dropping by!  Hope you'll be spending some time in your craft space creating soon! 

 

 

 

 

 

 

 

 

Related articles

Kick up your heels and do a little crafting

Mini Pallet with Robin

it's a purple kind of day..

Cloudy with a chance of Sunshine

it's a purple kind of day..

for this week's eBrush design team project, I decided to make some flowers to go along with an old song from my youth. 

For this project you'll need:
eBrush and SN adapter
Markers (Spectrum Noir - LG2, DG2, DG3, Blender, HB2, HB3, TB7)
Large Balled Stylus
Glue
Yellow Glitter
Pansy SVG File (SVGCuts.com)
digital cutting machine and software
Digital paper ( Vintage Pansies)
8 x 10 canvas
Collage Pauge (glossy)
ModPodge (glossy)
White cardstock
White copy paper
Printer

Cut the pansy file at the size it imports.  For this project I cut three flowers and three leaves in white cardstock. Set aside.  The picture below is just the flower parts.

I used the ebrush and markers to color my flowers.  You can add a bit more interest by using the blender marker and flick in a few extra veins.

Add a few details.  Then using the stylus, create a little more dimension. 

 

Put the flowers together -- add a small drop of glue in the center of the flower and liberally add some glitter and let dry. Remove the excess.  Color the leaves as desired and add some dimension using the stylus.  Add a thin coat of Modge Podge to the flower and the leaves. Glue the leaves to the back of the flower. 

Using an editing program, create the document for your background.  I used Paint 2 (MAC) and imported the digital paper and then added the wording for this particular canvas,
Little purple pansies touched with yellow gold,
Growing in one corner of the garden old,
We are very tiny, but must try, try, try,
Just one spot to gladden, you and I.

In whatever corner we may chance to grow,
Whether cold or warm the wind may ever blow,
Dark the day, or sunny, we must try, try, try
Just one spot to gladden, you and I.

This was a song I used to sing as a child in our children's church group. and pansies are among my favorite flowers for Spring and Fall color.

Print and tear the edges of the printed paper.  Using the collage pauge, apply the paper to the canvas as directed by the manufacturer.  Let dry.
Arrange and glue the flowers to the canvas.  Add some additional embellishments as desired. 

Thanks for dropping by today.  Hope you've created some crafting  time in your schedule this coming week! 

 

 

 

 

 

Related articles

Sunny Sunflowers

missing you....Pink & Main style

There's no place like "gnome"