Izbzee

2023 5 Tags of Spring - Day 5

It's the final day of this year's reveal.  If you haven't visited the FB page/album and seen all the beautiful makes, today's your day!  There are some amazing pieces from group members and it's always fun to see what others make and create!  

Today's tag is all in pink and white.  I used some digital paper I had in my stash.  The focal piece was generated using swirl and heart shapes found in the SCAL library.  I did use the Symmetrical Mirror command in SCAL to make both sides match.  While not perfect, I did learn a few things in the process and the final results aren't too bad!  ;)  

I used a couple of the small word stamps from a retired Fun Stampers Journey set on a small rectangle scrap of digital paper.  I chose the words to reflect some feelings I was having while creating this for someone special.  

Some small pink acrylic dots were added as well.  

Hoping this weekend offers good things in a creative way for you.  Take care and enjoy!

2023 5 Tags of Spring - Day 4

While looking through some pins on Pinterest, I noticed some beautiful book spines that were being used as bookmarks.  I can't bear to cut up a book, so I thought it might be fun to do a simple spine and use a background paper I created in SPARK.  I added a  resin bezel and an antiqued tag after foiling the "spine"  with some simple lines and fill.  

Using SCAL 6 Pro, I filled the tag shape with the background paper using Pattern Fill.  Print and then foil.  I used two colors of foil, Gold for the broader rectangle shape and pink for the lines.  I left the paper in the upper left corner of the mat and used the WYSIWYG method of adding the foil.  This also allowed ease in changing the foil for the two colors,   Once the foiling was finished, I used the Print 2 cut method for cutting tag.  

I added a gold diamond shaped eyelet tof the ribbon to thread through and hang the heart bezel and tag that had some jewelry rings added.

Thanks again for stopping by - we're nearing the conclusion of this year's reveal.  It's always sad to see it end, but then again, we look forward to the next year's makes.  What's crafting in your creative space this week?  Hoping good things!  

2023 5 Tags of Spring - Day 3

Fun and lots of paper shapes create this fun tag for day 3.  The chocolate bunny is from Simply Crafty SVGs.  It's resized to fit on this mini tag that measures about 1.5 inches wide by 2.5 inches in height.  The flowers and leaves can be found in the SCAL library (SandraCreateinSpain folder)

It's also a good tag to use scraps with.  Add some ink, markers and a bit of glue, it's also a quick assemble.  The small hello is a print 2 cut.  Embossing the tag base adds a little more dimension and it was swiped with an ink pad in an antiquing color.  

Again, thanks for dropping by today.  Set aside some creative time and enjoy nurturing your soul this week.  

2023 5 Tags of Spring - Day 2

using some Pastel Digital paper from Nit Wit collections,  as well as the floral image used in the framed areas of this tag, this tag was a fun make.  I used the faux glassine technique used in the Valentine Tag project shared in this project. 

The Tag is made of a simple rectangle with equal sized and spaced circle cuts. The hanger element is created using a round rectangle and half circle and the Union command in SCAL 6 was used before adding a smaller circle for the twine to go through.  A little bit of antiqued cheesecloth and a word strip were used to finish off the tag.  

I really like the spring colors and hoping they brighten your day as well.  Spend a little time in your creative space this week!  Enjoy!

2023 5 Tags of Spring - Reveal

It's that time of year again!  I'm excited that the group wanted to do it again.  The rules are the same.... and it's just as fun to make new tags again this year.

This pinterest inspired tag was made using basic shapes from the SCAL Library.  It was fun to play with shapes and create the "eyelet" lace.  The pattern fill command is a great way to use digital paper -- all pieces for this tag were print 2 cut.  For deeper color, I used some markers for a more intense color on the flowers, stems and leaves. Markers were also used on the edges of each of the pieces.  

Thanks for stopping by.  Hoping you have some creative time carved out this week.  Enjoy all the possibilities that Spring brings. 

3d Heart Treasure Box

When I first got a sneak peek at this box, I was so excited!  I had a couple of thoughts on how to make it. Below is my final version.

I love that the front and back walls of this piece are reinforced, making the box very sturdy and the box top is hinged in the back, keeping the top and bottom together. The box is made from a rusty colored cardstock that complimented the colors in the panel pieces and reminded me of the colors in the sand in the area where the image was originally taken.  

The front flap doesn't require a closure, but you could certainly add one if desired.   This file from Simply Crafty SVGs will be a go to in the future for several projects through the year.    

Using SCAL 6 Pro, I used the clip path command to place the image in the panel shapes.  This made it pretty easy for the print to cut process for the Skycut as well.  The slot canyon image was printed on glossy photo stock and the colors from the printer were incredibly vibrant!  

 

Thanks for stopping by.  Each visit is appreciated.  Hoping you have some creative time marked out this week - if not, find some time.  Your heart and spirit will benefit (among other things).  

Valentine Tags

Have you ever made glassine paper?  I remember doing this years ago, but tried it again using a couple of different types of paper.  The plan was to use the paper in some Valentine tags - These tags are oversized a bit -- as I didn't want to lose any of the detail in the images.

The article with most of the details can be found on the Artistry here.

Rather than stamp images I decided to print on the papers....  I used tracing paper and tissue paper as my test mediums... The prints came out as expected.  The tissue paper image colors are a little diffused and the tracing paper image is much brighter.  I used SCAL 6 Pro as my editing program to size and print from while using the png images from Creative Fabrica. 

I didn't antique either paper before printing or afterwards.  Once the printing was completed, I finished the process by adding the wax and loving the change in the look of each of the papers.  

tissue paper

tracing paper

These were really fun to make and I have some ideas for some other versions I'd like to try in the next couple of months.  We'll see how that rolls out!  LOL 

The tags were created in SCAL 6 Pro using several steps... it's important to have your tag just the way your want it before going to the next step.  Once the tag was ready, I placed an image on the mat, placed the tag on top and used Clip Path > Set Clip Path and printed the tags and cut them using the Skycut C24.  

Details for assembling the tags is in the article -- found here.  

Thanks for dropping by and I hope you've carved out some creative time this week and month.  Nurture your creative spirit any way you feel you  must.  

Valentine Fresh Blooms

Everyone I know likes flowers... even paper ones especially at Valentine's Day.

How about this one created using files from Simply Crafty SVGs? I used the box base from the Santa Hat box and the flowers from the Bee Hive files.  I added Heart 6, a star and a leaf from the shapes library in SCAL.  

The florals, hearts, leaves and sepals were cut using some sketch pad paper.  The skycut had no problem cutting the images including the smallest of the centers of the flower.  They were all colored using alcohol markers, front and back.  I used a star for the sepal on each of the flowers.  The petals of the flowers were shaped with the petals going down.  All of these pieces are wired and hot glue was used to attach the wire to each flower.  You can add some additional details to the wire by wrapping around a skewer if desired.  

No changes to the box file were necessary other than copying an additional panel for the front panel since you won't be using the Santa face included with the file.  Using the Pattern command, fill the panel pieces with a fun digital paper.  The paper used in our sample is from Creative Fabrica.  The score lines were changed to DRAW and the scoring tool was used to draw those lines.  

Once the pieces are scored and cut, glue the printed panels to the box sides.  Glue the two sides of the box together as instructed in the video Sandy has created for putting the box together.  The panels were inked using some distress ink in a pink that nearly matched the pink in the flowers.  The ink adds another layer of color and interest to the overall box.  You can add the ink BEFORE adding to the box sides, or after.  

The metallic LOVE stamp is an old retired embossing and die set from Sizzix Cuttlebug.  It was cut from a piece of an aluminum soda can scrap. 

This project would be easy to replicate and could be finished within a hour or two once the florals are colored.

Thanks for stopping by!.  Hope you've marked out some creative time this week and enjoy the process of nurturing your creative spirit.

 

Valentine Tiered Tray take 2

Last year, I created this one.

 

I wanted a few new things in 2023... so this was the result!

I even cut the fabric for the mini hearts using the Skycut and SCAL 5 pro!  That was a fun and very successful project, though my stitching small stuff like that wasn't as "perfect" as I would have liked.  But it was fun and very enjoyable seeing how the skycut managed the fabric.  I used Jacquard's cotton fabric.  It's already pre-treated and can be run through the rear tray of my inkjet printer with ease.  

You'll find all the details for creating the hearts and other items for this year's tray on The Artistry.  

 

Take Out Surprise!

If you're a hot drink sort of fan, this project would be a fun gift to share with a friend.  Especially with the surprise they'd get when opening the lid. If you don't want to add our suggested insert, you could add a couple of keurig cups or a gift card to their favorite shop. 

The Takeout Coffee cup file is from Simply Crafty Svgs.  A very easy file to use and assemble.  The large version was used for our project.  The penguin head is from the Penguin Explosion Box also from Simply Crafty Svgs. 

After finding some fun mechanisms created by Rob Ives, I thought I could use the Spring Mechanism with this project.  The mechanism itself is easy to assemble and use.   

(image from RobIves.com website)

Two flaps were glued to the top of the inside of the spring mechanism and to the underside of the head.  There are also 2 flaps glued to the bottom of the mechanism and are glued to the inside bottom of the cup.  The flaps provide the stability in keeping the spring mechanism vertical in the cup.  

Mat and cut the cup as designed.  No changes necessary.  The penguin head is resized to a smaller size -- you may want to test the perfect size for you if you use the spring assembly as designed or change the size.  The penguin head pieces were resized to 70% of the original design size.  

(a short video can be seen here)

AC cardstock was used for each base construction Digital papers used in this project are Snowed In from Echo Park.  The cup panels and band are filled with papers from the collection using SCAL 5 Pro.  The stitched heart is also from the collection.  Ink the edges of the panels in a compatible color.  All base elements and print to cut images are cut using the Skycut C24.  

You'll need:  
AC Cardstock (white, black, yellow)
white gel pen
holographic glitter pen
Bearly Art Glue
Skycut C24
SCAL 5 Pro
Elastic band
Spring Mechanism (RobIves.com) - Spring file used in this project is found here. 

 

Thanks for stopping by!  Hoping your creative time this year has been plentiful and will continue to be so.  Have a happy day!