Izbzee

2022 Three Tags of Fall - Tag 2

It's day 2 of the 3 Tags of Fall Reveal.  Yesterday's  tags were pretty awesome.  Did you stop by the Facebook page to see them?  If not, you should -- and it's likely that one or two of today's tags have posted as well.  

Today's tag was a fun one.  I'd been looking for a "long-boxy" sort of bear but couldn't find what I was looking for as an image or SVG, so I thought I'd give designing what I was looking for based on the sketch in my sketchbook for this year's tags.  It didn't turn out too badly and was all done in SCAL5 Pro - using shapes in the library. 

The leaves were from a file I've had for a while and got at Creative Fabrica.  After coloring, I added some foam tape to the back of the top two.  Created the bundle of three and slipped it under the one arm as shown in the image above.  

I used the same tag shape but didn't add the frame.  You'll find the directions to create it in yesterday's post.  I extended the length of the tag by adding a piece of 2" wide plaid ribbon I've had in my stash for a very long time, stapling it to the bottom of the tag. 

The leaves and bear were colored using Ohuhu alcohol markers.  I like the primitive colored look for this version.  It was fun to make.

Stop by the Facebook page today to see the tags that have posted.  I'm sure there will be some additional lovelies added today and again tomorrow.  

2022 Three Tags of Fall - Tag 1

It's time for the annual 3 Tags of Fall reveal.  After perusing Pinterest for a little bit, I found a couple of ideas that I thought would translate to paper very well.

Using the library in SCAL5, the elements for this tag were created.  The tag shape was made using the vertical rectangle, a half circle.  These two elements were "fused" using the union command once the half circle was elongated a bit and centered on the upper edge of the rectangle.  A small circle (.10) was added and centered in the upper portion of the half circle.  Front minus Back was used again.  If you want a reinforcement for the tag, you can create on in a different color or in the same paper you used to cut the tag.  

The tag frame was created using two vertical rectangles and the Back minus Front command.  some foam tape was added to the back of this piece and then attached to the tag base.  Edge all the pieces with some black ink.  

The flowers are created using stars from the library.  Place two stars together, shifting one star slightly to the left or right.  Use Union to create the petals.  Cut two petals for each flower. Color and ink the edges.  For the flower centers, cut a solid circle and a frame.  Emboss the flower center and using some off white ink, ink the edges of the circle frame.  Using a paper piercer, curl some of the petals.  Attach the flowers using some pop dots.  Add some twine for a little interest if desired.  

Stop by the eCal-SCAL Facebook page to see all of the wonderful tags that are being created for this year's Reveal.  

Say Cheese!

Gotta love these shutter mechanism cards!  So happy that The Artistry liked it too. This card also features an EZ Sound Module, button activated from InviteByVoice.com.  Bonus:  there's an SVG / PDF file you can download as well for the shutter mechanism.  Hope you'll stop by!  

 

 

 

Let's Paint! Party invites

It's that time of year and we have some painting projects that need a few extra hands to help make it happen.  That wheelchair ramp is a long one and it's needs a bit of refreshing!  I figured that using some fun invites would make the job seem a little more fun and we'd enjoy the company as we tackled the ramp.  You'll find more of the details on The Artistry!  

And while you're there -- be sure to check out this amazing 210+ Font Bundle! There are definitely some keepers in this one!  All have commercial use licenses!  I spotted a few that could be used with a pen or other draw tool, like the Foil Quill.  Scroll down the page to take a peek at all the fonts included - You won't be disappointed.  

Hoping you'll get some time to spend in your crafty space this week to nurture your creative spirit and soul.  Hope it's a great one!  

Shabby Chic...

These blocks were so much fun to create and were a perfect birthday gift for someone very special.  

All the details for the blocks can be found at https://www.creativefabrica.com/.../shabby-chic-block-art/

The hydrangeas are from Dreaming Tree (Hydrangea Tray) 

Thanks for dropping by.  Hoping you've got some creative time scheduled on your calendar for the weekend!  Enjoy!

Beyond the basics Box card

Lots of color, sound* and fun in this card.  All the details on the Artistry today.   

Click here.  

* sound module from InvitebyVoice, learn more here about the module.  

DIY Thickers

I had so much fun making this fun gift box.  

Cardstock, paint, a bit of glue and a dollar store white gift box.  
You can find all the details on the Artistry blog.  

diamond style pot

This file was used for an April challenge in on the paper crafting groups on Facebook.  Thought I'd better get it done early in the month since the rest of the month has filled up fast with other crafting makes and a little bit of re-organization and some yard work thrown in as well.  

The paper for the basic structure is from AC cardstock  and the digital Teal damask paper is from a NitWit Collection called Porch Swing.  The diamond pot file is not available outside the challenge group... all pieces were cut using the Sizzix eclips 2 and eCal3  


Hoping you have scheduled some time in your creative space this week and for the coming week.  And thanks again for stopping by.  

Stencils and Clay

Take a peek at this new share on The Artistry!  Perfect for some Spring or Summer decor.  Lightweight stenciled clay ornaments using doodles and mandalas as stencils...  


And while you're visiting be sure to check out the promos now going on!  (shameless plug for @CreativeFabrica.com and affiliate link.)  All promotional pricing on the site is good through April 6!  Don't miss out on some fabulous deals.    

2021 Spring Tags Challenge - day 5

Today's the final day for the 5 Days of Spring Tag Challenge for this year.  It's been a fun week and I hope you've taken the time to peruse all the fabulous tags created by our #ecalmakers on the FB page.  

I fell in love with this digital stamp from Polkadoodles!  No rain in the forecast for today, but we could sure use some!  

I imported the png file to eCal, resized, set to print 2 cut print.  Copied and pasted 2 additional images since I would need them to do the layering for this tag.  All of the images fit into a 6 inch square and I printed on white AC smooth cardstock.  I decided to do the fussy cutting myself for the images since the head, leg and water splash needed to be cut separately.  The tag is from the library and cut using the eclips.

The coloring of the image and wash on the tag was done using watercolor pencils and a waterbrush.  I added a crochet thread string for the tie on the hat and used a drop of glue to secure it front and center.  When dry, assemble using pop up dots and a bit of glue here and there as needed.  

Add a few drops of Crystal Nuvo drops to the water splashes for a final touch.  

This is the final tag in this year's series.  Looking forward to next year's as well.  Be sure to pop by the FB page and review all of the submissions for this week.  And if you're so inclined, please join us in an upcoming challenge on the page.  The more the merrier.

Set aside some time to be creative!  Your spirit will definitely be nourished.